HDMI CEC

If you use an HDMI ARC connection with your television, your TV’s remote control will automatically operate the soundbar for standard tasks such as powering on and off and volume control. The soundbar supports HDMI CEC and works with compatible TVs (consult your TV’s user manual for compatibility with HDMI CEC).


Automatic TV remote control 

With most Samsung, LG, Sony and Vizio TVs, the soundbar will respond automatically to your TV’s remote control. To disable this function, press and hold the SHUFFLE button on the Enchant remote control for 5 seconds. 

Programming the TV remote control 

For other TVs, you have to manually programme the soundbar to respond to your TV’s remote control:

  1. Press and hold the ‘+’ and Source (the left arrow) buttons for 5 seconds to activate the programming mode. 
  2. Press the ‘-’ button of the soundbar and press ON/OFF on your TV’s remote control. 
  3. Follow the same procedure as for decreasing and increasing the volume. Press ‘+’ and ‘-’ on the soundbar and on MUTE on your TV’s remote control to mute the sound. 
  4. Press ‘+’ and the Source button on the soundbar again. Now the soundbar will respond to your TV’s remote control.


Auto Standby/Auto Wakeup

This soundbar will automatically switch to the standby mode after 10 minutes of inactivity and without transmission of audio/video from a connected device. The soundbar will automatically be enabled again when it receives an audio signal from the last detected connection.