Check if the subwoofer’s LED is continuously illuminated white. A flashing LED means that the connection is broken. In this case, pair the subwoofer and soundbar manually. Remove the sub from the power supply for one minute and pair manually.

Pairing the subwoofer

  1. Enable the soundbar and subwoofer. 
  2. Press the PAIR SUBWOOFER button on the soundbar or the PAIRING button on the subwoofer to activate the pairing mode. ‘SUB PAIRING’ will be displayed. After the pairing, you will hear an audio tone and ‘SUB PAIRED’ will be shown on the soundbar’s display.

NOTE: If you are experiencing issues pairing the Enchant Sub place the sub closer to the soundbar and/or check for possible interference.